APPLICATION ENGINEERING / CUSTOMER DESIGN CRITERIA / DATE TOOL REQUIRED AT
CUSTOMER SITE:
AE-004-1-A / 12-02-03 / *BLUE AREAS ARE FOR DME USE ONLY*
CUSTOMER NAME: /

DATE

/ FINALS REC’D / VERIFIED BY:
ARIASBROHLDONNEREIGLERHUANGHUGOMONTEROSSOPIEPENBROKSALHANEYSEAY
CONTACT NAME: /

PHONE #

/

FAX #

/

MATERIAL

GENERIC NAME:
BRAND NAME:
FILLER:
PROCESS TEMP:

DME STAT #

/

QUOTE #

/

P.O. #

/

JOB #

MAXIMUM MOLD HEIGHT:
/

HOT ONE PACKAGE SYSTEM

SHOW THE FOLLOWING:
TOP OF MOLD; OFFSET CORNER; OPERATOR;
LOCATION OF TERMINAL BOX; WATER ENTRANCE & EXIT
TOP TP/TB TP/WTROPER OP/TB OP/WTRTERM WATER N/A
TOP TP/TB TP/WTROPER OP/TB OP/WTRTERM WATERN/A TOP TP/TBTP/WTROPER OP/TBOP/WTRTERMWATERN/A
TOP TP/TB TP/WTR OPER OP/TB OP/WTR TERM WATER N/A
(Z) DIM. =
GATE
MACHINE NOZZLE RADIUS:
½ ¾ SPECIAL
ADD SPECIAL SIZE (if needed):
MOLD BASE SIZE:
ADD SIZE
ASSEMBLY SCREW DIRECTION:
TAPPED INTO NOZZLE PLATETAPPED INTO A-PLATETAPPED INTO BACKUP PLATE
ASSEMBLY SCREW LOCATION:
STANDARD LOCATIONSEE PRINTSSEE FAXESSEE PRINTS AND FAXESSEE CAD FILESSEE COMMENTSDME TO DETERMINE
TYPE OF ALIGNMENT:
SOLID DOWELSLEADER PINSTUB. DOWELSGUIDE PINS STANDARD LOCATIONSEE PRINTSSEE FAXESSEE PRINTS AND FAXESSEE CAD FILESSEE COMMENTSDME TO DETERMINE
QUANTITY REQUIRED: 2 4
ASSEMBLY SCREWS AND ALIGNMENT DETERMINED BY:
DME CUSTOMER
CLAMP LEDGE REQUIRED:
7/8 1-3/8 OTHER:
MOLD BASE BEING BUILT BY:
DME CUSTOMER
DME MANUFACTURING LOCATION:
CMI MELROSE PARK
TERMINAL BOX & CONNECTORS:
5-ZONE 8-ZONE 12-ZONE
DME SUPPLIED CUST. SUPPLIED
DME BRAND NON-DME BRAND
LIST BRAND IF NON-DME: / NOZZLE TYPE: 250 STD SERIES250 HP SERIESSPL 250 SERIES250 FTLD SERIES375 STD SERIES375 HP SERIESSPL 375 SERIES375 FTLD SERIES625 SERIESSPL 625 SERIESGM 4GM 4 FTLDGATE-MATE LITEGALAXYJUMBO GMMINI GMSTELLARSEE COMMENTS
TIP TYPE: STD PT GATEWR PT GATESPL PT GATEFULL BODY PT GATESTD SPRUE GATEEXT SPRUE GATESPL SPRUE GATESTD RING GATESPL RING GATEGALAXYGM STANDARDGM THRU HOLEGM WRGM SUPERSHARPSTELLAR SPRUE TIPSTELLAR POINTSEE BELOW
(T) DIA. OF SPRUE/RING GATE:
1/23/83/41"N/AOTHER / FLOW DIA:
PRIMARY= 1/45/163/81/25/83/44mm5mm6mm8mm10mm12mmN/A SECONDARY= 1/45/163/81/25/83/44mm5mm6mm8mm10mm12mmN/A TERNARY= 1/45/163/81/25/83/44mm5mm6mm8mm10mm12mmN/A
SYMMETRICALLY BALANCED: YESNO
# OF DROPS = 12346810121624324864SEE COMMENTS
OPERATING VOLTAGE AT MOLDERS:
208 210 220 230 240
OTHER:
PHASE REQUIRED AT MOLDERS:
SINGLE PHASE THREE PHASE / ELECTRICAL ZONE NUMBERING:
DME STANDARD
CUSTOMER SUPPLIED CAVITY/NOZZLE NUMBERS
COMMENTS:
CUSTOMER REQUESTS CAD DATA YESNO
TYPE: E-MAILDISKFTPN/A FORMAT: IGES and DXFIGESDXFDWGN/ASEE COMMENTS
FTP:
E-MAIL: