5.381030 Cpuidle: Using Governor Menu

[ 5.381030] cpuidle: using governor menu

[ 5.381506] TCP cubic registered

[ 5.381773] NET: Registered protocol family 10

[ 5.382707] NET: Registered protocol family 17

[ 5.382744] Registering the dns_resolver key type

[ 5.382830] powernow-k8: Found 1 AMD E-350 Processor (2 cpu cores) (version 2.20.00)

[ 5.382939] powernow-k8: 0 : pstate 0 (1600 MHz)

[ 5.382943] powernow-k8: 1 : pstate 1 (1280 MHz)

[ 5.382946] powernow-k8: 2 : pstate 2 (800 MHz)

[ 5.383568] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3

[ 5.384276] Using IPI No-Shortcut mode

[ 5.384427] PM: Hibernation image not present or could not be loaded.

[ 5.384447] registered taskstats version 1

[ 5.384903] Magic number: 12:926:892

[ 5.384997] bdi default: hash matches

[ 5.385126] rtc_cmos 00:05: setting system clock to 2012-01-27 15:53:41 UTC (1327679621)

[ 5.385132] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found

[ 5.385135] EDD information not available.

[ 5.385368] Freeing unused kernel memory: 700k freed

[ 5.385902] Write protecting the kernel text: 5192k

[ 5.386032] Write protecting the kernel read-only data: 2068k

[ 5.441810] <30>udev[69]: starting version 167

[ 5.520326] usb 1-3: new high speed USB device using ehci_hcd and address 3

[ 5.527910] ahci 0000:00:11.0: version 3.0

[ 5.527965] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19

[ 5.530698] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 1 ports 6 Gbps 0x1 impl SATA mode

[ 5.530708] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part

[ 5.535229] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded

[ 5.535269] r8169 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16

[ 5.535324] r8169 0000:01:00.0: setting latency timer to 64

[ 5.535333] r8169 0000:01:00.0: (unregistered net_device): unknown MAC, using family default

[ 5.535414] r8169 0000:01:00.0: irq 40 for MSI/MSI-X

[ 5.536078] scsi0 : ahci

[ 5.536257] ata1: SATA max UDMA/133 abar m1024@0xd024e000 port 0xd024e100 irq 19

[ 5.536567] r8169 0000:01:00.0: eth0: RTL8168b/8111b at 0xf8038000, 2c:27:d7:a7:5d:0a, XID 0c200000 IRQ 40

[ 5.572078] Refined TSC clocksource calibration: 1596.003 MHz.

[ 5.572091] Switching to clocksource tsc

[ 5.657503] acpi device:02: registered as cooling_device2

[ 5.657641] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4

[ 5.657993] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)

[ 5.708165] Initializing USB Mass Storage driver...

[ 5.708403] scsi1 : usb-storage 1-3:1.0

[ 5.708584] usbcore: registered new interface driver usb-storage

[ 5.708587] USB Mass Storage support registered.

[ 5.776287] usb 2-1: new high speed USB device using ehci_hcd and address 2

[ 6.028243] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

[ 6.029547] ata1.00: ATA-8: ST9500420AS, 0006HPM1, max UDMA/100

[ 6.029561] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA

[ 6.031250] ata1.00: configured for UDMA/100

[ 6.031758] scsi 0:0:0:0: Direct-Access ATA ST9500420AS 0006 PQ: 0 ANSI: 5

[ 6.032153] sd 0:0:0:0: Attached scsi generic sg0 type 0

[ 6.032290] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)

[ 6.032706] sd 0:0:0:0: [sda] Write Protect is off

[ 6.032716] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00

[ 6.032863] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 6.262669] sda: sda1 sda2 sda3 sda4

[ 6.263383] sd 0:0:0:0: [sda] Attached SCSI disk

[ 6.684287] usb 2-2: new high speed USB device using ehci_hcd and address 3

[ 6.711991] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW SE-S084F TB00 PQ: 0 ANSI: 0

[ 6.726218] sr0: scsi3-mmc drive: 10x/24x writer dvd-ram cd/rw xa/form2 cdda tray

[ 6.726232] cdrom: Uniform CD-ROM driver Revision: 3.20

[ 6.726503] sr 1:0:0:0: Attached scsi CD-ROM sr0

[ 6.726688] sr 1:0:0:0: Attached scsi generic sg1 type 5

[ 7.080286] scsi2 : usb-storage 2-2:1.0

[ 7.344276] usb 4-2: new low speed USB device using ohci_hcd and address 2

[ 7.543872] input: Microsoft Compact Optical Mouse 500 as /devices/pci0000:00/0000:00:12.0/usb4/4-2/4-2:1.0/input/input5

[ 7.544148] generic-usb 0003:045E:0737.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Compact Optical Mouse 500] on usb-0000:00:12.0-2/input0

[ 7.544181] usbcore: registered new interface driver usbhid

[ 7.544186] usbhid: USB HID core driver

[ 8.084306] scsi 2:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS

[ 8.086819] sd 2:0:0:0: Attached scsi generic sg2 type 0

[ 8.093965] sd 2:0:0:0: [sdb] Attached SCSI removable disk

[ 11.184660] xor: automatically using best checksumming function: pIII_sse

[ 11.204089] pIII_sse : 3150.000 MB/sec

[ 11.204094] xor: using function: pIII_sse (3150.000 MB/sec)

[ 11.209178] device-mapper: dm-raid45: initialized v0.2594b

[ 11.214378] md: linear personality registered for level -1

[ 11.219847] md: multipath personality registered for level -4

[ 11.224998] md: raid0 personality registered for level 0

[ 11.232624] md: raid1 personality registered for level 1

[ 11.237583] async_tx: api initialized (async)

[ 11.308222] raid6: int32x1 320 MB/s

[ 11.376197] raid6: int32x2 329 MB/s

[ 11.444153] raid6: int32x4 290 MB/s

[ 11.512105] raid6: int32x8 312 MB/s

[ 11.580105] raid6: mmxx1 655 MB/s

[ 11.648093] raid6: mmxx2 1038 MB/s

[ 11.716109] raid6: sse1x1 646 MB/s

[ 11.784099] raid6: sse1x2 1013 MB/s

[ 11.852118] raid6: sse2x1 1069 MB/s

[ 11.920126] raid6: sse2x2 1440 MB/s

[ 11.920129] raid6: using algorithm sse2x2 (1440 MB/s)

[ 11.932733] md: raid6 personality registered for level 6

[ 11.932739] md: raid5 personality registered for level 5

[ 11.932743] md: raid4 personality registered for level 4

[ 11.948780] md: raid10 personality registered for level 10

[ 17.271555] ISO 9660 Extensions: Microsoft Joliet Level 3

[ 17.445609] ISO 9660 Extensions: RRIP_1991A

[ 17.549838] aufs 2.1-standalone.tree-38-rcN-20110207

[ 17.719087] squashfs: version 4.0 (2009/01/31) Phillip Lougher

[ 44.732262] usb 1-1: new high speed USB device using ehci_hcd and address 4

[ 46.926098] usb 1-1: USB disconnect, address 4

[ 47.196257] usb 1-1: new high speed USB device using ehci_hcd and address 5

[ 67.543566] usb 4-2: USB disconnect, address 2

[ 69.248264] usb 4-2: new low speed USB device using ohci_hcd and address 3

[ 69.426975] input: Microsoft Compact Optical Mouse 500 as /devices/pci0000:00/0000:00:12.0/usb4/4-2/4-2:1.0/input/input6

[ 69.427198] generic-usb 0003:045E:0737.0002: input,hidraw0: USB HID v1.11 Mouse [Microsoft Compact Optical Mouse 500] on usb-0000:00:12.0-2/input0

[ 129.426664] usb 4-2: USB disconnect, address 3

[ 131.040885] <30>udev[2250]: starting version 167

[ 131.132251] usb 4-2: new low speed USB device using ohci_hcd and address 4

[ 131.310943] input: Microsoft Compact Optical Mouse 500 as /devices/pci0000:00/0000:00:12.0/usb4/4-2/4-2:1.0/input/input7

[ 131.311170] generic-usb 0003:045E:0737.0003: input,hidraw0: USB HID v1.11 Mouse [Microsoft Compact Optical Mouse 500] on usb-0000:00:12.0-2/input0

[ 146.349908] Linux video capture interface: v2.00

[ 148.953193] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0

[ 148.957328] uvcvideo: Found UVC 1.00 device HP Webcam-101 (174f:1134)

[ 148.980135] input: HP Webcam-101 as /devices/pci0000:00/0000:00:13.2/usb2/2-1/2-1:1.0/input/input8

[ 148.980266] usbcore: registered new interface driver uvcvideo

[ 148.980270] USB Video Class driver (v1.0.0)

[ 153.336165] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01

[ 153.360192] SP5100 TCO timer: mmio address 0xb8fe00 already in use

[ 153.362892] hp_accel: laptop model unknown, using default axes configuration

[ 153.398762] cfg80211: Calling CRDA to update world regulatory domain

[ 153.497319] Synaptics Touchpad, model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xe40000/0x5a0400

[ 153.544269] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9

[ 153.743140] lis3lv02d: 8 bits 3DC sensor found

[ 154.354465] input: HP WMI hotkeys as /devices/virtual/input/input10

[ 155.177277] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input11

[ 155.180686] Registered led device: hp::hddprotect

[ 155.180775] hp_accel: driver loaded

[ 160.292374] cfg80211: World regulatory domain updated:

[ 160.292383] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)

[ 160.292389] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

[ 160.292394] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)

[ 160.292399] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)

[ 160.292404] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

[ 160.292409] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

[ 162.041123] r8169 0000:01:00.0: eth0: link down

[ 162.043193] ADDRCONF(NETDEV_UP): eth0: link is not ready

[ 164.586314] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:

[ 164.586323] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)

[ 164.586327] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:

[ 164.586333] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)

[ 164.586337] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:

[ 164.586342] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)

[ 164.586346] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:

[ 164.586351] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)

[ 164.586355] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:

[ 164.586360] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)

[ 164.586364] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:

[ 164.586369] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)

[ 164.586373] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:

[ 164.586378] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)

[ 164.586382] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:

[ 164.586387] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)

[ 164.586391] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:

[ 164.586396] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)

[ 164.586400] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:

[ 164.586405] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)

[ 164.586409] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:

[ 164.586414] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)

[ 164.586418] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:

[ 164.586423] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm)

[ 164.586427] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:

[ 164.586431] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm)

[ 164.586436] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:

[ 164.586440] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (300 mBi, 2000 mBm)

[ 165.451081] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'

[ 165.453279] Registered led device: rt73usb-phy0::radio

[ 165.453444] Registered led device: rt73usb-phy0::assoc

[ 165.453571] Registered led device: rt73usb-phy0::quality

[ 165.457015] usbcore: registered new interface driver rt73usb

[ 168.939361] 1-1:1.0: Missing Free firmware

[ 171.138679] phy0 -> rt2x00lib_reject_firmware: Error - Failed to request Firmware.

[ 171.144459] 1-1:1.0: Missing Free firmware

[ 171.148947] phy0 -> rt2x00lib_reject_firmware: Error - Failed to request Firmware.

[ 171.538266] HDA Intel 0000:00:01.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19

[ 171.538366] HDA Intel 0000:00:01.1: irq 41 for MSI/MSI-X

[ 171.538402] HDA Intel 0000:00:01.1: setting latency timer to 64

[ 171.552541] hda-intel: Enable sync_write for AMD chipset

[ 172.631240] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16

[ 172.631332] HDA Intel 0000:00:14.2: setting latency timer to 64

[ 172.660550] hda-intel: Enable sync_write for AMD chipset

[ 173.020544] input: HDA ATI SB Mic at Ext Right Jack as /devices/pci0000:00/0000:00:14.2/sound/card1/input12

[ 173.020866] input: HDA ATI SB HP Out at Ext Right Jack as /devices/pci0000:00/0000:00:14.2/sound/card1/input13

[ 182.212101] lp: driver loaded but no devices found

[ 182.872588] ppdev: user-space parallel port driver

[ 191.310616] usb 4-2: USB disconnect, address 4

[ 193.016260] usb 4-2: new low speed USB device using ohci_hcd and address 5

[ 193.194797] input: Microsoft Compact Optical Mouse 500 as /devices/pci0000:00/0000:00:12.0/usb4/4-2/4-2:1.0/input/input14

[ 193.195030] generic-usb 0003:045E:0737.0004: input,hidraw0: USB HID v1.11 Mouse [Microsoft Compact Optical Mouse 500] on usb-0000:00:12.0-2/input0

[ 193.701593] pci 0000:00:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18

[ 238.547034] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.

trisquel@trisquel:~$ lspci

00:00.0 Host bridge: Advanced Micro Devices [AMD] Family 14h Processor Root Complex

00:01.0 VGA compatible controller: ATI Technologies Inc AMD Radeon HD 6310 GraphicsATI

00:01.1 Audio device: ATI Technologies Inc Wrestler HDMI Audio [Radeon HD 6250/6310]

00:04.0 PCI bridge: Advanced Micro Devices [AMD] Family 14h Processor Root Port

00:05.0 PCI bridge: Advanced Micro Devices [AMD] Family 14h Processor Root Port

00:11.0 SATA controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] (rev 40)

00:12.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller

00:12.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller

00:13.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller

00:13.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller

00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 42)

00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40)

00:14.3 ISA bridge: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller (rev 40)

00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (rev 40)

00:16.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller

00:16.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller

00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 0 (rev 43)

00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 1

00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 2

00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 3

00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 4

00:18.5 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 6

00:18.6 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 5

00:18.7 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 7

01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)

02:00.0 Network controller: Ralink corp. RT5390 [802.11 b/g/n 1T1R G-band PCI Express Single Chip]

trisquel@trisquel:~$ dir

Desktop Documents Downloads Music Pictures Public Templates Videos

trisquel@trisquel:~$ make

bash: make: command not found

trisquel@trisquel:~$ dir

2011_0406_RT5390_RT5392_Linux_STA_V2.5.0.3_DPO Desktop Music Templates

2011_0406_RT5390_RT5392_Linux_STA_V2.5.0.3_DPO_GPL Documents Pictures Videos

2011_0406_RT5390_RT5392_Linux_STA_V2.5.0.3_DPO_GPL.bz2 Downloads Public

trisquel@trisquel:~$ cd 2011_0406_RT5390_RT5392_Linux_STA_V2.5.0.3_DPO

trisquel@trisquel:~/2011_0406_RT5390_RT5392_Linux_STA_V2.5.0.3_DPO$ sudo apt/get install patch

sudo: apt/get: command not found

trisquel@trisquel:~/2011_0406_RT5390_RT5392_Linux_STA_V2.5.0.3_DPO$ sudo apt-get install patch

Reading package lists... Done

Building dependency tree

Reading state information... Done

Suggested packages:

diffutils-doc

The following NEW packages will be installed:

patch

0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.

Need to get 122 kB of archives.

After this operation, 250 kB of additional disk space will be used.

Err dagda/main patch i386 2.6-3

Could not resolve 'es.archive.trisquel.info'

Failed to fetch Could not resolve 'es.archive.trisquel.info'

E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing?

trisquel@trisquel:~/2011_0406_RT5390_RT5392_Linux_STA_V2.5.0.3_DPO$ make

bash: make: command not found

trisquel@trisquel:~/2011_0406_RT5390_RT5392_Linux_STA_V2.5.0.3_DPO$ make

bash: make: command not found

trisquel@trisquel:~/2011_0406_RT5390_RT5392_Linux_STA_V2.5.0.3_DPO$ make install

bash: make: command not found

trisquel@trisquel:~/2011_0406_RT5390_RT5392_Linux_STA_V2.5.0.3_DPO$ cd..

bash: cd..: command not found

trisquel@trisquel:~/2011_0406_RT5390_RT5392_Linux_STA_V2.5.0.3_DPO$ ir

bash: ir: command not found

trisquel@trisquel:~/2011_0406_RT5390_RT5392_Linux_STA_V2.5.0.3_DPO$ cd

trisquel@trisquel:~$ dir

2011_0406_RT5390_RT5392_Linux_STA_V2.5.0.3_DPO Desktop Music Templates

2011_0406_RT5390_RT5392_Linux_STA_V2.5.0.3_DPO_GPL Documents Pictures Videos

2011_0406_RT5390_RT5392_Linux_STA_V2.5.0.3_DPO_GPL.bz2 Downloads Public

trisquel@trisquel:~$ lspci i grep network

Usage: lspci [<switches>]

Basic display modes:

-mmProduce machine-readable output (single -m for an obsolete format)

-tShow bus tree

Display options:

-vBe verbose (-vv for very verbose)

-kShow kernel drivers handling each device

-xShow hex-dump of the standard part of the config space

-xxxShow hex-dump of the whole config space (dangerous; root only)

-xxxxShow hex-dump of the 4096-byte extended config space (root only)

-bBus-centric view (addresses and IRQ's as seen by the bus)

-DAlways show domain numbers

Resolving of device ID's to names:

-nShow numeric ID's

-nnShow both textual and numeric ID's (names & numbers)

-qQuery the PCI ID database for unknown ID's via DNS

-qqAs above, but re-query locally cached entries

-QQuery the PCI ID database for all ID's via DNS

Selection of devices:

-s [[[[<domain>]:]<bus>]:][<slot>][.[<func>]]Show only devices in selected slots

-d [<vendor>]:[<device>]Show only devices with specified ID's

Other options:

-i <file>Use specified ID database instead of /usr/share/misc/pci.ids.gz

-p <file>Look up kernel modules in a given file instead of default modules.pcimap

-MEnable `bus mapping' mode (dangerous; root only)

PCI access options:

-A <method>Use the specified PCI access method (see `-A help' for a list)

-O <par>=<val>Set PCI access parameter (see `-O help' for a list)

-GEnable PCI access debugging

-H <mode>Use direct hardware access (<mode> = 1 or 2)

-F <file>Read PCI configuration dump from a given file

trisquel@trisquel:~$ setxkbmap

trisquel@trisquel:~$ lspci | grep network

trisquel@trisquel:~$ lspci /p