SAGAR V PATUKALE.

Contact: +91 9975950293

Email –

EXECUTIVE PROFILE

Having 5years of experience involving in auto industry as a Quality Engineer with hands on experience in PPAP,documentation, new product development, inspection, supplier assignment and inward inspection. Considerable experience of developing and implementing effective quality control.

SKILL HIGHLIGHTS

  • Experience auditing suppliers, internal suppliers. Supplier assignment and receipt inspection. Experience in monitoring inward inspection. Monitoring process raise NC’s & IPCR.
  • New product development, Coordinating PPAP documentation, ISIR, Dimensional inspection report,Material test report etc.
  • Handling external & internal complaints. Preparation of 8D, SCAPCAR’s for, BOM presentation, Failure Modes Effect Analysis (FMEA), Root Cause Analysis, and Mistake Proofing/Poka Yoke.
  • Performing layout inspection, sales and in-house rejection & customer return monitoring and corrective actions.
  • Preparation of First off & last off report, Dimensional inspection, Perform for line and final inspection.Working for TS documentation.
  • Experience in Process audit, Product audit, dock audit, supplier audit.

PROFESSIONAL EXPERIENCE

  1. Jaya-hind Industries Ltd., Pune. Feb. 2012 to till date

Designation: Engineer

Responsibility Handled-

  • Reviews all supplies, internal, and customer discrepancies, coordinate and track the effectiveness of corrective/proactive action efforts. Ensure supplier and vendor PPAP (Product Part Approval Process) as per the latest level.
  • Daily monitoring of Line, Customer & Supplier Quality concern and take corrective action & initiate Firewall / poka-yoke for permanent solution.
  • Identifying & developing potential vendors / suppliers along with purchase department for purchasing of high quality material. Pre-assessment of the vendors and suppliers and Approval.
  • Support new product development, new gauges development.Performing new product development documentation ISIR, Dimensional inspection report, Radiography test, Material test report.
  • Preparation of 8D, SCAP, 7 steps, CAR’s for customer complaints, internal complaints
  • Preparation & maintain advanced Quality tools such as GD&T, Failure Modes Effect Analysis (FMEA), Root Cause Analysis, Mistake Proofing/Poka Yoke, Quality Plans Implementation and approvals
  • Performing process audit, product audit, dock audit. Working for TS documentation.
  • Preparing documentation and procedures for transition to customers audit, internal audits
  • Prepare BOM, monthly MIS reports and periodic quality review of a product.
  • Responsible for implementing quality system and support supplier development.
  • Analysis of customer complaint through systemic investigation and initiate corrective action through Global 8D. Record Updation.
  • Monitoring customer return, process rise IPCR, NC’s, Deviation request, DCN & TCR.

AUTHORITIES –

  • Authorized to accept acceptable products & to hold non-confirming products.
  • Authorized to accept minor defects with reference to limit samples or those not affecting customers/standard requirements.
  • Authorized to release final products.

2. SEMCO Electric Pvt. Ltd, Chakan, Pune. Dec.2010 to Feb. 2012

Designation: Engineer

Responsibility Handled-

  • Ensure adequate training & development of plant quality, To Given training to Operator & QA Inspector about process, Product, and Dimensional CTQ & Visual defect awareness.
  • Interfaces and provides technical support onqualityissues with the customer. Visiting supplier for supplier audit and quality concern.
  • New part development–Process, Toolingand inspection methodology establishment, to witness thevarious testing likeperformance testing, endurance testing,approval ofQuality plan,PPAP, CP and PFMEA.
  • Monitoring line and final inspection, providing NC’s, develop PDIR
  • Conduct Process Audit, product audit and take actions on NCR’S
  • Working for line concerns performing petrol inspection. Performing dimensional inspection.
  • Process control, final inspection & Testing of finished & incoming material.
  • Review/ approve the inspection report, identify any problems, resolve NCR’s raise and keep the departmental staff informed of progress.
  • Ensure the adequate close-out of non-conformity, deviation requests, concession requests and technical queries.
  • Audit plans and conducting system/process audits in plant, supplier & vendor end & continuous follow-up for the closure of the NC’s.
  1. Accurate Gauging & Instruments Pvt. Ltd, Pune. Jun. 2009 to Dec. 2010

Designation: Engineer

Responsibility Handled-

  • Testingandassessingtheeffectiveness,accuracyorsafetyofCMMbasedonexistingsafetystandardsorperformanceguidelines.
  • Responsible for the line and final product quality.
  • Prepare work instructions, procedures & guidelines.
  • ProgrammingexperienceofCMMOfflineandonlineusingvariousprobingsystem
  • Produceddetailedinspectionandassemblyinstructions. Performing trials.
  • WorkingonvariousMeasuringinstruments-OpticalGaugeProduct,Conturomatic,Vicivision,ProfileProjector,Roundnessetc
  • Reporting on the performance of the Quality System to the management for review & as an improvement of the Quality System.
  • Calibration of coordinate measuring machine as per ISO Standard.
EDUCATION

Bachelors of Engineering, Mechanical –2009- First Class

PERSONAL DETAILS
Name -Sagar V. Patukale

Permanent Address - 4/79, Near Rasana Corner, Ichalkaranji-416115.

Date of Birth - 13th May 1988